Alarm Module: Service and Repair

ICM Removal and Installation

Inspection of ICM and Its Circuit Inspection of ICM and Its Circuit

REMOVAL
1. Disconnect negative (-) cable at battery.
2. Remove dash side trim (4) and steering column hole cover (3).
3. Remove steering column covers (1).
Turn steering wheel to access steering column cover screws (2).





4. Remove knee protector plate (if equipped).
5. Remove engine start knob (keyless start model).
6. Disconnect connector (1) from ICM (2).
7. Remove a screw (3) from ICM.





8. Remove ICM from steering lock assembly or steering lock unit.

NOTE: The antenna part of ICM is fragile. Therefore, do not add strong power to the part or twist the part.

INSTALLATION
Reverse the removal procedure.