1ST / Reverse Brake and One-Way No. 2 Clutch Disassembly and Reassembly
1st / Reverse Brake and One-Way No. 2 Clutch Disassembly and ReassemblyDisassembly
1. Remove one-way No. 2 clutch inner race (1).
2. Remove snap ring (1), using flat end rod or the like.
3. Remove one-way No. 2 clutch (2) and front planetary ring gear thrust washer (3).
4. Remove snap ring (1), using pliers or the like.
5. Remove front planetary ring gear flange (2) from front planetary ring gear (3).
6. Remove O-rings (1) from 1st / reverse brake piston (2).
Reassembly
1. Apply A/T fluid to new O-rings and install new O-rings (1) to 1st / reverse brake piston (2).
2. Install front planetary ring gear flange (1) on to front planetary ring gear (2).
3. Install snap ring (3), using pliers or the like.
4. Fit flat surface of thrust washer (1) to front planetary ring gear with petroleum jelly so as not to fall washer off when reassembling.
5. Install one-way No. 2 clutch (1).
6. Install snap ring, using flat head rod or the like.
7. Apply A/T fluid to outer surface of one-way No. 2 clutch race (1).
8. Install one-way No. 2 clutch race (1) to one-way No. 2 clutch (2).
9. Check that one-way No. 2 clutch (1) turns freely when turned counterclockwise [A] and looks when turned clockwise [B].
