Right Case Disassembly and Reassembly
Right Case Disassembly and ReassemblyDisassembly
1. Remove differential side oil seal from right case.
2. Remove differential side bearing outer race (1) using brass bar (2), if necessary.
3. Remove input shaft oil seal by using special tool, if necessary.
Special Tool (A):09913-75830
4. Pull out countershaft right bearing outer race by using special tools, if necessary.
Special Tool
(A):09930-30104
(B):09941-64511
Reassembly
1. Install input shaft oil seal facing its spring side upward until it becomes flush with case surface. Use special tool and hammer for installation and apply grease to oil seal lip.
Grease 99000-25010SUZUKI Super Grease A
Special Tool (A):09913-76010
2. Install countershaft right bearing outer race (1) by using special tools and hammer.
Special Tool
(A):09913-75821
(B):09924-84510-004
3. Install differential side bearing outer race by using special tool and hammer.
Special Tool
(A):09924-74510
(B):09925-14520
