Spark Plug Inspection
Spark Plug InspectionReference: Spark Plug Removal and Installation
CAUTION:
^ When servicing the iridium / platinum spark plugs (slender center electrode type plugs), do not touch the center electrode to avoid damage to it. The electrode is not strong enough against mechanical force as it is slender and its material is not mechanically tough.
^ Do not clean or adjust gap for the iridium / platinum spark plugs.
Inspect spark plug for the following:
^ Electrode wear
^ Carbon deposits
^ Insulator damage
If any abnormality is found for nickel spark plugs, adjust air gap, clean with spark plug cleaner or replace them with specified new plugs. For iridium / platinum spark plugs, replace them with new plugs.
Spark plug air gap
"a": 1.0 - 1.1 mm (0.040 - 0.043 in.)
Spark plug type
Non-EVAP-leak-check model: NGK BKR6E-11 (Nickel)
EVAP leak check model: NGK IFR5J11 (Iridium)
NOTE: For EVAP leak check system, refer to Precaution on EVAP system.