Refrigerant Temperature Sensor: Service and Repair
Thermal Switch Removal and InstallationRemoval
1. Remove compressor from engine referring to Compressor Assembly Removal and Installation:Manual Type.
2. Disconnect thermal switch connector.
3. Remove magnet clutch lead wire clamp.
4. Remove thermal switch (1) from compressor using flat head (2).
Installation
Revers removal procedure noting the following instructions.
^ Apply silicon sealant to contact face (2) of thermal switch (1).
"A": Silicon sealant 99000 34220 SUZUKI SILICON SEALANT KE-347W (100g)
^ Install compressor to vehicle referring to Compressor Assembly Removal and Installation:Manual Type.
^ Evacuate and charge the A/C system referring to "Evacuation" and "Charge" in Operation Procedure for Refrigerant Charge:Manual Type.