Suspension Control Arm / Bushing Disassembly and Assembly
Suspension Control Arm / Bushing Disassembly and AssemblyDisassembly
1. Cut off bushing flange (rubber) (1) with knife.
2. Push out bushing by using hydraulic press (2) and special tools.
Special Tool
(A):09943-76310
(B):09913-75821
Assembly
1. Front bushing
Press-fit front bushing (1) by using special tools and press (2).
Special Tool
(A):09943-76310
(B):09913-75821
CAUTION: Be sure to use new bushing.
NOTE: Before installing bushing, apply soap water on its circumference to facilitate bushing installation.
2. Press-fit bushing (1) so that dimensions "A" and "B" in figure become equal.
