Body Control Systems: Service and Repair
BCM Removal and InstallationREMOVAL
1. Remove dash side trim and steering column hole cover.
2. Remove BCM mounting bolts (1).
3. Disconnect connectors from BCM (2).
INSTALLATION
Reverse removal procedure for installation, noting following points.
^ Connect connectors securely.
^ If BCM is replaced of vehicle equipped with TPMS, register ID code of tire pressure sensor into the BCM. Refer to Registration Procedure for Tire Pressure Sensor ID Code.
^ With keyless entry system (other than keyless start model), if BCM is replaced, register transmitter code into BCM, referring to Programming Transmitter Code for Keyless Entry System (Other than Keyless Start Model).