Operation CHARM: Car repair manuals for everyone.

Advanced Air Bag

Scan Tool Data

Data list of SDM

Data List Of SDM:





Scan Tool Data Definition

Capacitor voltage (V)
This parameter indicates the capacity of the backup condenser installed to maintain the ignition current (as much as possible) even when the power supply to SDM that ignites the inflator is shut off.

Power supply voltage (V)
Power supply voltage is an analog input signal read by SDM.

Driver air bag 1 RES (Driver air bag 1st stage initiator resistance) (ohm)
This parameter indicates the resistance of the driver air bag (1st stage) initiator circuit.

Pass air bag 1 RES (Passenger air bag 1st stage initiator resistance) (ohm)
This parameter indicates the resistance of the passenger air bag (1st stage) initiator circuit.

Driv pretensioner RES (Driver pretensioner initiator resistance) (ohm)
This parameter indicates the resistance of the driver seat belt pretensioner initiator circuit.

Pass pretensioner RES (Passenger pretensioner initiator resistance) (ohm)
This parameter indicates the resistance of the passenger seat belt pretensioner initiator circuit.

Driv side bag RES (Driver side-air bag initiator resistance) (ohm)
This parameter indicates the resistance of the driver side-air bag initiator circuit.

Pass side bag RES (Passenger side-air bag initiator resistance) (ohm)
This parameter indicates the resistance of the passenger side-air bag initiator circuit.

Driv curtain bag RES (Driver side curtain-air bag initiator resistance) (ohm)
This parameter indicates the resistance of the driver side curtain-air bag initiator circuit.

Pass curtain bag RES (Passenger side curtain-air bag initiator resistance) (ohm)
This parameter indicates the resistance of the passenger side curtain-air bag initiator circuit.

Driv air bag 2 RES (Driver air bag 2nd stage initiator resistance) (ohm)
This parameter indicates the resistance of the driver's air bag (2nd stage) initiator circuit.

Pass air bag 2 RES (Passenger air bag 2nd stage initiator resistance) (ohm)
This parameter indicates the resistance of the passenger's air bag (2nd stage) initiator circuit.

System type (10ch)
This parameter indicates the number of initiator circuits.

Driv seat position (Driver seat position)
This parameter indicates the state of the driver's seat position.

Driv seat belt (Driver seat belt)
This parameter indicates the state of the driver's seat belt.

Pass seat belt (Passenger seat belt)
This parameter indicates the state of the passenger's seat belt.

OCM status
This parameter indicates state of passenger seat occupant classification which is based on OCM signal.