Operation CHARM: Car repair manuals for everyone.

Important

IMPORTANT

WARNING/CAUTION/NOTE
Please read this manual and follow its instructions carefully. To emphasize special information, the words, WARNING, CAUTION and NOTE have special meanings. Pay special attention to the messages highlighted by these signal words.

WARNING: Indicates a potential hazard that could result in death or injury.

CAUTION: Indicates a potential hazard that could result in vehicle damage.

NOTE: Indicates special information to make maintenance easier or instructions clearer.

WARNING: This service manual is intended for authorized Suzuki dealers and qualified service technicians only. Inexperienced technicians or technicians without the proper tools and equipment may not be able to properly perform the services described in this manual.
Improper repair may result in injury to the technician and may render the vehicle unsafe for the driver and passengers.


WARNING: For vehicles equipped with a Supplemental Restraint or Air Bag System:
^ Service on and around the air bag system components or wiring must be performed only by an authorized SUZUKI dealer. Refer to Air Bag System Components and Wiring Location View under General Description in air bag system section in order to confirm whether you are performing service on or near the air bag system components or wiring. Please observe all WARNINGS and Service Precautions under On-Vehicle Service in air bag system section before performing service on or around the air bag system components or wiring. Failure to follow WARNINGS could result in unintentional activation of the system or could render the system inoperative. Either of these two conditions may result in severe injury.
^ If the air bag system and another vehicle system both need repair, Suzuki recommends that the air bag system be repaired first, to help avoid unintended air bag system activation.
^ If the air bag system and another vehicle system both need repair, Suzuki recommends that the air bag system be repaired first, to help avoid unintended air bag system activation.
^ If the vehicle will be exposed to temperatures over 93 °C (200 °F ), for example, during a paint baking process, remove the air bag system components, that is air bag or inflator modules, SDM and/or seat belt with pretensioner, beforehand to avoid component damage or unintended activation.


The circle with a slash in this manual means "Don't do this" or "Don't let this happen".




IMPORTANT