Transfer Right Case and Left Case Disassembly and Reassembly
Transfer Right Case and Left Case Disassembly and ReassemblyDisassembly
1. Remove oil seals from right case (1) using special tool, if necessary.
Special Tool (A): 09925-15410
2. Remove oil plate (1) from right case (2), if necessary.
3. Remove oil seals from left case using flat end rod or the like, if necessary.
Reassembly
1. When installing oil seal No.2 (1) and No.3 (2) to right case (3) using special tool, use care so that oil seals in proper direction and position as shown in figure.
Apply grease to oil seal lip.
Special Tool (A): 09925-15410
"A": Grease 99000-25010SUZUKI Super Grease A
Oil seals installing depth
"a": 23.5 - 24.0 mm (0.925 - 0.945 in.)
"b": 38.0 - 39.0 mm (1.496 - 1.535 in.)
2. Install oil plate to right case.
Tightening torque
Oil plate bolt: 9 Nm (0.9 kgf-m, 6.5 ft. lbs.)
3. When installing new oil seal No.1 (1) and No.2 (2) to left case (3) using special tool, use care so that oil seals in proper direction as shown in figure.
Apply grease to oil seal lip.
Special Tool
(A): 09913-85210 (For oil seal No.1)
(A): 09944-88210 (For oil seal No.2)
"A": Grease 99000-25010SUZUKI Super Grease A
