C1075
DTC C1075: Steering Angle Sensor Calibration Incomplete
DTC Detecting Condition and Trouble Area
DTC Troubleshooting
1.
Was "Electronic Stability Program Check" performed?
YES
Go to Step 2.
NO
Go to Electronic Stability Program Check.
2. DTC check for ESP(R)
Connect SUZUKI scan tool to DLC with ignition switch turned OFF.
Turn ignition switch ON and check DTC for ESP(R).
Is there any DTC(s) other than C1075?
YES
Go to applicable DTC troubleshooting.
NO
Go to Step 3.
3. Check sensor calibration
Calibrate steering angle sensor referring to Programming and Relearning Sensor Calibration of ESP(R).
Clear all DTC(s) and check DTC for ESP(R).
Is DTC C1075 still detected?
YES
Substitute a known-good steering angle sensor and recheck. If DTC C1075 is still detected, substitute a known-good ESP(R) hydraulic unit / control module assembly and recheck.
NO
Calibration was incomplete.