P0113

DTC P0112 / P0113

DTC Detecting Condition and Trouble Area






Wiring Diagram

Refer to P0101 DTC P0101.

DTC Confirmation Procedure

1) Turn ignition switch to ON position for 10 sec.

DTC Troubleshooting


1.
Was "Engine and Emission Control System Check" performed?
YES
Go to Step 2.
NO
Go to Engine and Emission Control System Check.

2. IAT sensor circuit check

Check IAT sensor circuit according to Step 3 under P0111 DTC P0111.

Are they in good condition?
YES
Go to Step 3.
NO
Repair or replace defective wire harness.

3. IAT sensor check

Check IAT sensor. Inspection

Is it in good condition?
YES
Substitute a known-good ECM and recheck.
NO
Replace MAF & IAT sensor.