DTC Clearance

DTC Clearance

Using SUZUKI Scan Tool

1) Turn off ignition switch.
2) Connect SUZUKI scan tool to DLC (1) located on underside of driver side instrument panel.
Special Tool

(A): SUZUKI scan tool (SUZUKI-SDT)





3) Turn on ignition switch.
4) Clear DTC according to instructions displayed on SUZUKI scan tool. Refer to SUZUKI scan tool operator's manual for further details.
5) After completing DTC clearance, turn off ignition switch and disconnect SUZUKI scan tool from DLC.
6) Perform DTC check and confirm that no DTC is displayed on scan tool. DTC Check

Not Using SUZUKI Scan Tool

1) Display history DTC of HVAC control module referring to "Not Using SUZUKI Scan Tool" under DTC Check DTC Check:Auto A/C.
2) Push "OFF" switch (1) and "MODE" (air flow) switch (2) on auto A/C panel simultaneously at least 3 seconds.
3) LCD displays "CLr" (3) when history DTC is successfully cleared.





4) Perform DTC check and confirm that no DTC is displayed on LCD. DTC Check