Advanced Air Bag

Deployed Air Bag (Inflator) Module and Activated Seat Belt Pretensioner Disposal

WARNING:

If live air bag (inflator) modules or seat belt pretensioners are disposed of without being deployed/activated beforehand using the proper procedure, there is a risk of personal injury and health problems from contact with the harmful substances that may come out if the deployment container seal is broken.

Before disposing of any live air bag (inflator) modules or seat belt pretensioners, be sure to deploy/activate them using the specified procedure. Never dispose of any live ones through ordinary refuse disposal channels.

Deployed air bag (inflator) module and the activated seat belt pretensioner can be disposed of through normal refuse channels just like any other parts. For their disposal, however, the following points should be noted.

- The air bag (inflator) module and the seat belt pretensioner immediately after deployment / activation is very hot. Wait for 30 minutes to cool it off before handling it.
- Never apply water, oil, etc. to deployed air bag (inflator) module and the activated seat belt pretensioner to cool it off and be careful so that water, oil etc. does not get on the deployed air bag (inflator) module and the activated seat belt pretensioner.





- After the air bag (inflator) module has been deployed, the surface of the air bag may contain a powdery residue. This powder consists primarily of cornstarch (used to lubricate the bag as it inflates) and by-products of the chemical reaction. As with many service procedures, you should wear gloves and safety glasses.
- When disposing of the deployed air bag (inflator) module and the activated seat belt pretensioner, be sure to seal it in a vinyl bag.





- When air bag (inflator) module and seat belt pretensioner have been deployed / activated inside the vehicle which is going to be scrapped, leave them as installed to the vehicle.
- Be sure to wash your hands with mild soap and water after handling them.