P1825

DTC P1825

DTC Detecting Condition and Trouble Area






DTC Confirmation Procedure

NOTE:

Confirm that the following conditions are satisfied when using this procedure.

1) Turn ignition switch to ON position.
2) Turn ignition switch to OFF position for 10 sec.
3) Repeat Step 1).

DTC Troubleshooting



1.
Was "CVT System Check" performed?
YES
Go to Step 2.
NO
Go to CVT System Check.

2. DTC check

Check DTC. DTC Check

Is there DTC other than P1825?
YES
Go to troubleshooting for applicable DTC.
NO
Go to Step 3.

3. DTC recheck

Perform Programming and Relearning TCM Learning Control Initialization.
Clear DTC. DTC Clearance
Turn ignition switch to OFF position.
Perform DTC confirmation procedure, and check DTC.

Is DTC P1825 still detected?
YES
Substitute a known-good ROM (CVT assembly) and recheck DTC.
NO
End.