Except Advanced Air Bag

Scan Tool Data


Air bag control module

Data list of SDM





Scan Tool Data Definition

Backup Volt (V)

This parameter indicates the capacity of the backup condenser installed to maintain the ignition current (as much as possible) even when the power supply to SDM that ignites the inflator is shut off.

Battery Voltage (V)

Battery voltage is an analog input signal read by SDM.

Driv A/B Ini Res (Driver air bag initiator resistance) (ohm)

This parameter indicates the resistance of the driver air bag initiator circuit.

Pass A/B Ini Res (Passenger air bag initiator resistance) (ohm)

This parameter indicates the resistance of the passenger air bag initiator circuit.

Driv Preten Ini Res (Driver pretensioner initiator resistance) (ohm)

This parameter indicates the resistance of the driver seat belt pretensioner initiator circuit.

Pass Preten Ini Res (Passenger pretensioner initiator resistance) (ohm)

This parameter indicates the resistance of the passenger seat belt pretensioner initiator circuit.

System ID (4ch)

This parameter indicates the number of initiator circuits.