C1038

DTC C1038: Steering Angle Sensor Detect Rolling Counter Failure

DTC Detecting Condition and Trouble Area






DTC Troubleshooting

1.
Was "Electronic Stability Program Check" performed?
YES -
Go to Step 2.
NO -
Go to (ESP) Check Electronic Stability Program Check.

2. Check DTC for ESP(R)

Connect SUZUKI scan tool to DLC with ignition switch turned OFF.
Turn ignition switch ON and check DTC.

Is there any DTC(s) other than C1038 and C1096?
YES -
Go to applicable DTC troubleshooting.
NO -
Substitute a known-good steering angle sensor and recheck. If DTC C1038 is still detected, substitute a known-good ESP(R) hydraulic unit control module assembly and recheck.