Cylinder Block Heater Removal and Installation (If Equipped)

Cylinder Block Heater Removal and Installation (If Equipped)

Removal

1) Disconnect negative (-) cable from battery.
2) Drain coolant. Draining
3) Remove A/C condenser cooling fan.
- Manual A/C model: Removal and Installation
- Auto A/C model: Removal and Installation
4) Remove exhaust manifold cover.
5) Remove engine block heater (1).











Installation

Cylinder Block Heater Inspection (If Equipped)

Reverse removal procedure for installation noting the following.

- Use new cylinder block heater bolts.
- Tighten cylinder block heater bolts (1) to specified torque.

Tightening torque
Cylinder block heater bolt (a): 11 Nm (1.1 kgf-m, 8.5 lbf-ft)





- Refill coolant. Refilling
- Check for coolant leaks. Initial Inspection and Diagnostic Overview