Operation CHARM: Car repair manuals for everyone.

Removal and Installation (Non-A/C)




HVAC Unit Removal and Installation (Non-A/C)

HVAC Unit Components

Removal

1) Drain engine coolant referring to Draining Cooling System Draining
, and then disconnect heater hoses from HVAC unit.
2) Remove cowl top cover from vehicle body referring to [1][2]Cowl Cowl Top and Front Lower Cross Member Components.
3) Remove instrument panel from vehicle body referring to Service and Repair Instrument Panel Removal and Installation.
4) Remove HVAC unit (1) from vehicle body by removing nuts (2).






Installation

Reverse removal procedure noting the following instructions.

- Be careful not to catch any cable and wiring harness in inappropriate position.
- Adjust control cables of HVAC control unit referring to HVAC Control Unit Removal and Installation HVAC Control Unit Removal and Installation.
- Refill cooling system with coolant referring to Refilling Cooling System Refilling.