Throttle Body Assembly Removal and Installation
Throttle Body Assembly Removal and Installation
Throttle Body and Intake Manifold Components
NOTE:
The throttle body will lose its original performance if it has been disassembled and reassembled.
Do not try to disassemble the throttle body.
Removal
1) Disconnect negative (-) cable from battery.
2) Drain coolant. Draining
3) Remove air cleaner assembly. Air Cleaner Assembly Removal and Installation
4) Disconnect engine coolant hoses (2) and electric connector (3) from throttle body assembly (1).
5) Remove throttle body assembly and its gasket from intake manifold.
Installation
Throttle Body Cleaning
1) Clean mating surfaces and install new throttle body gasket (1) to intake manifold.
2) Install throttle body assembly (1) to intake manifold.
3) Connect electric connector (3) and coolant hoses (2) to throttle body assembly (1).
4) Install air cleaner assembly. Air Cleaner Assembly Removal and Installation
5) Refill cooling system. Refilling
6) Connect negative (-) cable to battery.
7) Check for coolant leaks. Initial Inspection and Diagnostic Overview