Operation CHARM: Car repair manuals for everyone.

Ignition System Check




Ignition System Check

1.
Was "Engine and Emission Control System Check" performed?
YES -
Go to Step 2.
NO -
Go to Engine and Emission Control System Check Engine and Emission Control System Check.

2. Ignition spark test 1

Perform ignition spark test. Ignition Spark Test

Is test result satisfactory?
YES -
Go to Step 3.
NO -
Go to Step 4.

3. Ignition timing check

Check ignition timing. Testing and Inspection

Is check result satisfactory?
YES -
Ignition system is in good condition.
NO -
Repair or replace malfunctioning part.

4. Confirmation of malfunction-detected cylinder

Confirm any cylinder that the malfunction is detected on ignition spark test.

Are there malfunctions in all cylinders?
YES -
Go to Step 8.
NO -
Go to Step 5.

5. Ignition spark test 2

Replace spark plug in malfunction-detected cylinder with spark plug of normal cylinder.
Perform ignition spark test on spark plug newly installed in malfunction-detected cylinder. Ignition Spark Test

Is test result satisfactory?
YES -
Replace spark plug in malfunction-detected cylinder. Spark Plug Removal and Installation
NO -
Go to Step 6.

6. Ignition spark test 3

Replace ignition coil assembly of malfunction-detected cylinder with the ignition coil assembly of normal cylinder.
Perform ignition spark test on spark plug in malfunction-detected cylinder. Ignition Spark Test

Is test result satisfactory?
YES -
Replace ignition coil in malfunction-detected cylinder. Ignition Coil Assembly Removal and Installation
NO -
Go to Step 7.

7. Ignition coil assembly drive circuit check

Check drive circuits of each ignition coil assembly for open, short and poor connection.

Are circuits in good condition?
YES -
Go to Step 8.
NO -
Repair or replace malfunctioning part.

8. Ignition coil assembly power supply and ground circuit check

Check power supply and ground circuits of ignition coil assembly for open, short and poor connection.

Are circuits in good condition?
YES -
Substitute a known-good ECM and recheck.
NO -
Repair or replace malfunctioning part.