Procedures

Rear Differential Oil Level Check

1) Lift up vehicle and check oil leakage. Repair leaky point, if any.
2) Remove oil level / filler plug (1) and check oil contamination and oil level is lower end of oil level / filler plug hole (2).

If oil is excessive dirty or insufficient, replace oil or pour specified oil up to plug hole.
3) Apply sealant to thread of level / filler plug, and then tighten it to specified torque.

"A" Sealant: 99000-31260 (SUZUKI Bond No.1217G)

Tightening torque
Differential oil level / filler plug (a): 23 Nm (2.3 kgf-m, 17.0 lbf-ft)