Transfer Right Case and Left Case Disassembly and Reassembly

Transfer Right Case and Left Case Disassembly and Reassembly

Transfer Dismounting and Remounting

Transfer Assembly Components

Transfer Assembly Disassembly and Reassembly

Disassembly

1) Remove oil seals from right case (1) using special tool, if necessary.
Special Tool

(A): 09925-15410





2) Remove oil plate (1) from right case (2), if necessary.





3) Remove oil seals from left case using flat end rod or the like, if necessary.

Reassembly

1) When installing oil seal No.2 (1) and No.3 (2) to right case (3) using special tool, use care so that oil seals in proper direction and position as shown in figure.

Apply grease to oil seal lip.
Special Tool

(A): 09925-15410

"A" Grease: 99000-25011 (SUZUKI Super Grease A)

Oil seals installing depth
"a": 23.5 - 24.5 mm (0.925 - 0.964 in.)
"b": 38.0 - 39.0 mm (1.496 - 1.535 in.)





2) Install oil plate to right case.

Tightening torque
Oil plate bolt 10 Nm (1.0 kgf-m, 7.5 lbf-ft)

3) When installing new oil seal No.1 (1) and No.2 (2) to left case (3) using special tool, use care so that oil seals in proper direction as shown in figure.

Apply grease to oil seal lip.
Special Tool

(A): 09913-85210
(For oil seal No.1)

(A): 09944-88210
(For oil seal No.2)

"A" Grease: 99000-25011 (SUZUKI Super Grease A)