Engine, Cooling and Exhaust: Technical Service Bulletins

• Recalls
  • Campaign - Igniter Inspection
    • Overview
    • Vehicles Involved
    • Inspection/Replacement Reimbursement Procedures
    • I.Procedure For Camry
      • Overview
      • II. Igniter Inspection Procedure
      • III. Igniter Identification Marks
      • IV. Igniter Replacement Procedure and Completion Label
    • I.Procedure For Van
      • Overview
      • II. & III. Igniter Inspection Procedure
      • IV. Igniter Identification Marks
      • V.Igniter Replacement Procedure and Completion Label
• Customer Interest
  • Cooling Fan - Fluid Coupling Now Has 3 Stages
  • Engine - New Piston Rings Reduce Oil Consumption
  • Ignition - Rough Engine Idle or Engine Stalling
• By Symptom
  • Abnormal wear/deterioration
    • A/C - Rear, Updated Clamps for Blower And Water Valve
    • Engine - New Piston Rings Reduce Oil Consumption
  • Customer Interest
    • Cooling Fan - Fluid Coupling Now Has 3 Stages
    • Engine - New Piston Rings Reduce Oil Consumption
    • Ignition - Rough Engine Idle or Engine Stalling
  • Driveability
    • Ignition - Rough Engine Idle or Engine Stalling
  • Noise
    • Cooling Fan - Fluid Coupling Now Has 3 Stages
  • Odors
    • Exhaust System - Sulfur Smell
  • Poor performance
    • Heater - Performance Improvements
  • Recalls
    • Campaign - Igniter Inspection
      • Overview
      • Vehicles Involved
      • Inspection/Replacement Reimbursement Procedures
      • I.Procedure For Camry
        • Overview
        • II. Igniter Inspection Procedure
        • III. Igniter Identification Marks
        • IV. Igniter Replacement Procedure and Completion Label
      • I.Procedure For Van
        • Overview
        • II. & III. Igniter Inspection Procedure
        • IV. Igniter Identification Marks
        • V.Igniter Replacement Procedure and Completion Label
  • Starting problems
    • Campaign - Igniter Inspection
      • Overview
      • Vehicles Involved
      • Inspection/Replacement Reimbursement Procedures
      • I.Procedure For Camry
        • Overview
        • II. Igniter Inspection Procedure
        • III. Igniter Identification Marks
        • IV. Igniter Replacement Procedure and Completion Label
      • I.Procedure For Van
        • Overview
        • II. & III. Igniter Inspection Procedure
        • IV. Igniter Identification Marks
        • V.Igniter Replacement Procedure and Completion Label
• All Technical Service Bulletins
  • Canada - Cooling System - Radiator Cap Inspection Procedure
  • Vehicle - Specifications/Model Identification
    • Overview
    • 1984 Toyota Model Identification and Specifications
    • 1984 Toyota Vehicle Tune-Up Specifications
    • 1984 Toyota Lubrication Specification Chart
    • 1984 Toyota Vehicle Filter Applications
    • 1984 Toyota Vehicle Tire Guide
    • 1984 Toyota Vehicle Wheel Alignment Specifications
  • Warranty - Genuine Toyota Motor Oil Available
  • Engine - Tripod Support Bar
  • Cooling Fan - Fluid Coupling Now Has 3 Stages
  • A/C - Rear, Updated Clamps for Blower And Water Valve
  • Heater - Performance Improvements
  • Engine - New Piston Rings Reduce Oil Consumption
  • Campaign - Igniter Inspection
    • Overview
    • Vehicles Involved
    • Inspection/Replacement Reimbursement Procedures
    • I.Procedure For Camry
      • Overview
      • II. Igniter Inspection Procedure
      • III. Igniter Identification Marks
      • IV. Igniter Replacement Procedure and Completion Label
    • I.Procedure For Van
      • Overview
      • II. & III. Igniter Inspection Procedure
      • IV. Igniter Identification Marks
      • V.Igniter Replacement Procedure and Completion Label
  • Ignition - Rough Engine Idle or Engine Stalling
  • Engine - New Crankshaft Pulley Bolt And Torque
  • Exhaust System - Sulfur Smell
  • Cooling System - Radiator Cap Inspection Procedure