Snap Ring Specifications

Mark Thickness

Output shaft snap ring thickness
Front
C-1 1.75 - 1.80 mm / 0.0689 - 0.0709 in.
D 1.80 - 1.85 mm / 0.0709 - 0.0728 in.
D-1 1.85 - 1.90 mm / 0.0728 - 0.0748 in.
E 1.90 - 1.95 mm / 0.0748 - 0.0768 in.
E-1 1.95 - 2.00 mm / 0.0768 - 0.0787 in.
F 2.00 - 2.05 mm / 0.0787 - 0.0807 in.
F-1 2.05 - 2.10 mm / 0.0807 - 0.0827 in.
Rear
A 2.67 - 2.72 mm / 0.1051 - 0.1071 in.
B 2.73 - 2.78 mm / 0.1075 - 0.1094 in.
C 2.79 - 2.84 mm / 0.1098 - 0.1118 in.
D 2.85 - 2.90 mm / 0.1122 - 0.1142 in.
E 2.91 - 2.96 mm / 0.1146 - 0.1165 in.
F 2.97 - 3.02 mm / 0.1169 - 0.1189 in.
G 3.03 - 3.08 mm / 0.1193 - 0.1213 in.
H 3.09 - 3.14 mm / 0.1217 - 0.1236 in.
I 3.15 - 3.20 mm / 0.1240 - 0.1260 in.
J 3.21 - 3.26 mm / 0.1264 - 0.1283 in.
K 3.27 - 3.32 mm / 0.1287 - 0.1307 in.