150000 MI or 240000 KM

Lubricate
    Drive/Propeller Shaft
      4WD models. Lubricate grease fittings where available. Lubricate Lubricate slip joints. Tighten flange bolts. Grease daily if immersed in water.
Inspect/Adjust
    Drive Belt
      Check for cracks, wear and fluid contamination. Adjust tension if necessary.
Check
    Drum Brake System
      Inspect brake linings and drums.
    Disc Brake System
      Inspect brake pads and discs.
Tighten/Torque
    Body and Frame
      Inspect bolts and nuts on chassis and body, particularly the front and rear suspension member to cross body, the leaf spring u-bolts, the strut bar bracket to body, and seat installation bolts.
Inspect
    Steering
      Inspect steering linkage.
    Fuel Supply Line
      Inspect fuel lines, hoses and connections. Check for leaks and damage.
    Exhaust System
      Check for cracks, corrosion and leakage. Check heat shields for debris.
    Ball Joint
      Inspect ball joints and dust boots for looseness, cracks and damage. Inspect ball joints and dust boots.
Replace
    Spark Plug
      Replace with correct type and gap according to manufacturers specification.
    Fluid - Transfer Case
    Fluid - Differential
    Fluid - A/T
    Air Filter Element
Clean/Repack
    Wheel Bearing
      Repack front wheel bearings and thrust bushing.