Front Wiper Motor

Fig. 32 Front Wiper Motor Connector.:

1. Inspect low speed motor operation as follows:
a. Disconnect wiper motor electrical connector.
b. Connect positive battery lead to terminal 2 and negative to motor body, Fig. 32.
c. Ensure motor operates at low speed.
2. Inspect high speed motor operation as follows:
a. Connect positive battery lead to terminal 1 and negative to motor body.
b. Ensure motor operates at high speed.
3. Inspect motor operation, stopping at stop position, as follows:
a. Operate motor at low speed.
b. Disconnect positive battery lead to stop motor operation.
c. Connect battery positive lead to terminal 4.
d. Connect terminals 2 and 3.
e. Ensure motor stops running in Off position after motor operates again.
4. If motor operation is not as indicated, replace motor.