Snap Ring Specifications

Mark Thickness

Counter gear snap ring

Front bearing
1 2.05 - 2.10 mm / 0.0807 - 0.0827 in.
2 2.10 - 2.15 mm / 0.0827 - 0.0846 in.
3 2.15 - 2.20 mm / 0.0846 - 0.0866 in.
4 2.20 - 2.25 mm / 0.0866 - 0.0886 in.
5 2.25 - 2.30 mm / 0.0886 - 0.0906 in.
6 2.30 - 2.35 mm / 0.0906 - 0.0925 in.

Gear spline piece No.5 (5-speed) or oil separator (4-speed)
A 2.80 - 2.85 mm / 0.1102 - 0.1122 in.
B 2.85 - 2.90 mm / 0.1122 - 0.1142 in.
C 2.90 - 2.95 mm / 0.1142 - 0.1161 in.
D 2.95 - 3.00 mm / 0.1161 - 0.1181 in.
E 3.00 - 3.05 mm / 0.1181 - 0.1201 in.
F 3.05 - 3.10 mm / 0.1201 - 0.1220 in.
G 3.10 - 3.15 mm / 0.1220 - 0.1240 in.