Measurement Specifications

Output shaft
2nd gear journal diameter
Limit 42.835 mm / 1.6841 in.
3rd gear journal diameter
Limit 37.80 mm / 1.4882 in.
Flange thickness
Limit 5.60 mm / 0.2205 in.
Runout
Limit 0.06 mm / 0.0024 in.

1st gear inner race flange thickness
Limit 4.76 mm / 1.1874 in.

1st gear inner race outer diameter
Limit 42.855 mm / 1.6872 in.