Engine, Cooling and Exhaust: Technical Service Bulletins

• Recalls
  • Campaign - Replace Cylinder Head Gasket % Core Plugs
    • Overview
    • Administrative Information
    • I.Work Procedure:
    • III. Core Plugs and Gaskets Replacement Procedures:
    • IV. SSC Completion Label Installation Procedure
    • Owner Letter
  • Campaign - Radiator Inspect, Fan And Fan Shroud Replace
    • Overview
    • Dealer & Owner Notification
    • Technical Instructions (Fan & Fan Shroud)
      • 1. Work Procedure
      • Parts, Materials and Tools, Replacement Procedures
      • Label Installation Procedure
    • Customer Letter
• Customer Interest
  • Engine - Accessory Drive Shaft Knocking Noise
• By Symptom
  • Customer Interest
    • Engine - Accessory Drive Shaft Knocking Noise
  • Leaks
    • Campaign - Replace Cylinder Head Gasket % Core Plugs
      • Overview
      • Administrative Information
      • I.Work Procedure:
      • III. Core Plugs and Gaskets Replacement Procedures:
      • IV. SSC Completion Label Installation Procedure
      • Owner Letter
  • Noise
    • Engine - Accessory Drive Shaft Knocking Noise
  • Odors
    • Exhaust System - Sulfur Smell
  • Recalls
    • Campaign - Replace Cylinder Head Gasket % Core Plugs
      • Overview
      • Administrative Information
      • I.Work Procedure:
      • III. Core Plugs and Gaskets Replacement Procedures:
      • IV. SSC Completion Label Installation Procedure
      • Owner Letter
    • Campaign - Radiator Inspect, Fan And Fan Shroud Replace
      • Overview
      • Dealer & Owner Notification
      • Technical Instructions (Fan & Fan Shroud)
        • 1. Work Procedure
        • Parts, Materials and Tools, Replacement Procedures
        • Label Installation Procedure
      • Customer Letter
• All Technical Service Bulletins
  • Canada - Cooling System - Radiator Cap Inspection Procedure
  • Vehicle - Specifications
    • Overview
    • Vehicle Model and Codes:
    • Weight (Pounds) :
    • Restraint System Type:
    • Dimensions:
    • Engine
    • Ignition System
    • Ignition Timing
    • Valve Clearance
    • Cooling System
    • Fuel System
    • Electrical System
    • Lubrication System
    • Tires
    • Brakes
    • Clutch
    • Transmission
    • Steering
    • Alignment
    • Suspension
    • Axle
    • Transfer Case
  • Engine - Tripod Support Bar
  • Engine - Accessory Drive Shaft Knocking Noise
  • Wiring - Double Locking Type Connector Information
    • Overview
    • 250 and 305 Non-Waterproof Type
    • 250 Waterproof Type
    • Service and Disassembly of Connector:
    • Install Terminal to Connector
  • Engine - Cylinder Head Coolant Core Plug Change
  • Campaign - Replace Cylinder Head Gasket % Core Plugs
    • Overview
    • Administrative Information
    • I.Work Procedure:
    • III. Core Plugs and Gaskets Replacement Procedures:
    • IV. SSC Completion Label Installation Procedure
    • Owner Letter
  • Campaign - Radiator Inspect, Fan And Fan Shroud Replace
    • Overview
    • Dealer & Owner Notification
    • Technical Instructions (Fan & Fan Shroud)
      • 1. Work Procedure
      • Parts, Materials and Tools, Replacement Procedures
      • Label Installation Procedure
    • Customer Letter
  • Exhaust - Limited Lifetime Guarantee On Pipes
  • Engine - Revised Crankshaft Pulley Installation
  • Exhaust System - Sulfur Smell
  • Cooling System - Radiator Cap Inspection Procedure
  • Canada - Bolts - Standard Bolt Torque Specifications