Overdrive Relay

Overdrive Relay Inspection:

- Remove the overdrive relay from the pedal bracket.
- Using an ohmmeter, check that there is continuity between terminals 1 and 2.

Overdrive Relay Inspection:

- Apply battery voltage to the relay terminals 2 and 3.
- Using an ohmmeter, check that there is no continuity between terminals 1 and 2.
- Apply battery voltage to the relay terminals 2 and 4.
- Using an ohmmeter, check that there is no continuity between terminals 1 and 2.
- Install the overdrive relay to the pedal bracket.