Impact Sensor: Service Precautions

1. Never reuse the front airbag sensors involved in a collision when the SRS has deployed. (Replace both the left and right airbag sensors.)
2. Install the front airbag sensor with the arrow on the sensor facing toward the front of the vehicle.
3. The front airbag sensor set bolts have been anti-rust treated. When the sensor is removed. always replace the set bolt and the nut with new ones.
4. The front airbag sensors is equipped with an electrical connection check mechanism. Be sure to lock this mechanism securely when connecting the connector. If the connector is not securely locked. a malfunction code will be detected by the diagnosis system.