Deployment Tool Inspection

CONFIRM FUNCTIONING OF SST





When deploying the airbag, always use the specifiedSST: SRS AIRBAG DEPLOYMENT TOOL.SST 09082-00700

1. CONNECT SST TO BATTERY





Connect the red clip of the SST to the battery positive(+) terminal and the black clip to the battery negative(-) terminal.
HINT:
Do not connect the yellow connector which connects with the airbag system.

2. CONFIRM FUNCTIONING OF SST
Press the SST activation switch, and confirm the LED of the SST activation switch lights up.
CAUTION:
If the LED lights up when the activation switch is not being pressed, SST malfunction is probable, so definitely do not use the SST.