Vehicle Speed Sensor: Service and Repair

VEHICLE SPEED SENSOR NO.1 REPLACEMENT



1. Disconnect NO.1 vehicle speed sensor connector.

Vehicle Speed Sensor NO.1:

Vehicle Speed Sensor NO.1:

2. Remove NO.1 vehicle speed sensor.

(a) Remove the bolt, retaining plate and pull out NO.1 vehicle speed sensor.
(b) Remove the 0-ring from the NO.1 vehicle speed sensor.
(c) Install new 0-ring on the NO.1 vehicle speed sensor.

3. Install vehicle speed sensor assembly.

Torque: 16 Nm (160 kgf.cm< 12ft lbf)

4. Connect vehicle speed sensor connector.


Note: Installation is the reverse order of removal.

VEHICLE SPEED SENSOR NO.2 REPLACEMENT

Vehicle Speed Sensor NO.2:

Vehicle Speed Sensor NO.2:

1. Disconnect NO.2 vehicle speed sensor connector.



2. Remove NO.2 vehicle speed sensor.

(a) Remove the bolt, retaining plate and pull out NO.2 vehicle speed sensor.
(b) Remove the 0-ring from the NO.2 vehicle speed sensor.
(c) Install new 0-ring on the NO.2 vehicle speed sensor.

3. Install vehicle speed sensor assembly.

Torque: 5.4 Nm (55 kgf.cm, 48 in.lbf)

4. Connect vehicle speed sensor connector.


Note: Installation is the reverse order of removal.