Disassembly/Assembly

INSTALLATION HINT: Assembly is in the reverse order of disassembly.

1. REMOVE FUEL PUMP LEAD WIRE.
2. REMOVE FUEL SENDER GAUGE FROM FUEL PUMP BRACKET.
- Disconnect the fuel sender gauge connector.





- Remove the 2 screws and sender gauge.
3. REMOVE FUEL PUMP FROM FUEL PUMP BRACKET.





- Pull off the lower side of the fuel pump from the pump bracket.
- Disconnect the fuel hose from the fuel pump, and remove the fuel pump.
- Remove the rubber cushion from the fuel pump.
4. REMOVE FUEL PUMP FILTER FROM FUEL PUMP.





- Using a small screwdriver, remove the clip.
- Pull out the pump filter.

INSTALLATION HINT: Install the pump filter with a new clip.

5. REMOVE CONNECTOR:





- Remove the 2 screws, connector support, connector and gasket.

INSTALLATION HINT: Install the connector with a new gasket.