Output Shaft, M/T

Gear Thrust Clearance
1st, 2nd and 3rd Gears
Standard 0.10-0.25 mm (0.0039-0.0098 inch)
Maximum 0.30 mm (0.0118 inch)
Gear Radial Clearance
1st, 2nd and 5th Gears
Standard 0.009-0.060 mm (0.0004-0.0024 inch)
Maximum 0.150 mm (0.0059 inch)
3rd Gear
Standard 0.015-0.066 mm (0.0006-0.0026 inch)
Maximum 0.200 mm (0.0079 inch)
First Gear Inner Race
Outer Diameter, Minimum 42.975 mm (1.6919 inch)
Flange Thickness, Minimum 4.78 mm (0.1881 inch)
Output Shaft Flange Thickness
Minimum 5.60 mm (0.2205 inch)
Outer Diameter Of The Output Shaft Journal, Minimum Diameter
2nd Gear 42.975 mm (1.6919 inch)
3rd Gear 31.969 mm (1.2586 inch)
Shaft Runout
Maximum 0.06 mm (0.0024 inch)