Weatherstrip - Rear Sliding Window Upper Channel
REF.: BODYNO.: BO95-O11
DATE: NOVEMBER 24, 1995
MODEL: TAC
'95 TACOMA BACK WINDOW WEATHERSTRIP ADHESION
To improve sliding rear window weatherstrip retention to the upper channel on 1995 Tacoma trucks, an increased amount of adhesive was added to the weatherstrip.
PRODUCTION EFFECTIVE:
VIN: 4TA*N****SZ082100
FIELD FIX:
Use the following field-fix procedure if this condition is found on vehicles prior to the production effective VIN.
1. Clean mating surfaces (weatherstrip channel and weatherstrip) with adhesive cleaner.
2. Apply a thin coat of Loctite brand # 460 adhesive (or equivalent) to BOTH ends of the weatherstrip and to the weatherstrip channel as shown in the illustration:
3. Install both ends of the weatherstrip into the weatherstrip channel and allow to dry thoroughly.
WARRANTY INFORMATION: