Axle Shaft, Conventional Fixed/Floating

SERVICE SPECIFICATIONS
Axle Shaft Deviation [1] 0.7 mm (0.027 inch) Maximum
Deviation [2] 0.1 mm (0.0039 inch) Maximum
Bearing Backlash [1] 0.7 mm (0.027 inch) Maximum
Flange Runout 0.1 mm (0.004 inch) Maximum
Shaft Runout 2.0 mm (0.079 inch) Maximum

TIGHTENING SPECIFICATIONS
Backing Plate To Shaft Mounting Nuts 68 Nm (50 ft. lbs.)

[1]: Measured in the bearing shaft direction.
[2]: At the surface of the axle shaft outside the hub bolt.