Output Shaft, Transfer Case

Rear Output Shaft Assembly
Drive Sprocket Thrust Clearance
Standard 0.10-0.25 mm (0.0039-0.0098 inch)
Maximum 0.25 mm (0.0098 inch)
Rear Output Shaft Journal Surface (Minimum)
Part A 27.98 mm (1.1016 inch)
Part B 36.98 mm (1.4561 inch)
Drive Sprocket Radial Clearance
Standard 0.010-0.055 mm (0.0004-0.0022 inch)
Maximum 0.055 mm (0.0022 inch)
Front Drive Shift Fork To Clutch Sleeve Clearance:
Maximum 1.0 mm (0.039 inch)
High and Low Shift Fork To Sleeve Clearance:
Maximum 1.0 mm (0.039 inch)