Procedure

1. Owner requests a seat belt extender from the dealer.

2. Dealer verifies the need for a seat belt extender and obtains a current copy of TSB and copies the worksheet.

3. Dealer measures the customer and completes the worksheet. Dealer determines the correct part number and places a Critical Order for the part through the TDN Parts Network.

4. Dealer receives the seat belt extender and calls the customer in to check fit of the part.

5. If the seat belt extender fit is OK, dealership personnel completes the customer information label on the part, explains usage of the part and gives the customer a copy of the completed worksheet.

6. Dealer places a copy of the completed worksheet in the customer's records.

NOTES:








*1. If dimension "L" is under 24 inches the extender must not be used due to its design and construction. This applies to front lap seat belts for the following models:

^ '93 & '94 Tercel

^ '93, '94, '95 Paseo

^ '93 Corolla 4WD Wagon

*2. This seat belt was supplied by TOKAI RIKA. Make sure that the identification mark on the back side if the seat belt buckle is the same as shown.





*3. This seat belt was supplied by QSS. Make sure that the identification mark on the back side if the seat belt buckle is the same as shown.

*4 Extenders must not be used for center front seat belt positions for Avalon, Tacoma, Compact Pickup and T1OO with bench seats or for the center rear seat belt positions except for 1997 Camry.