Transmission Temperature Sensor/Switch: Service and Repair

1. DISCONNECT ATF TEMPERATURE SENSOR CONNECTOR





2. REMOVE ATF TEMPERATURE SENSOR
- Remove the ATF temperature sensor.
- Remove the O-ring from the ATF temperature sensor.
3. INSTALL ATF TEMPERATURE SENSOR
- Coat a new O-ring with ATF and install it to the ATF temperature sensor.
- Install the ATF temperature sensor

Torque: 15 N.m (150 kgf.cm, 11 ft.lbf)

4. CONNECT ATF TEMPERATURE SENSOR CONNECTOR

INSTALLATION NOTICE: Be careful not to twist the wire harness.