Front Bearing Retainer

NOTE: For removal and installation procedures refer to "Manual Transmission/Transaxle, Service and Repair."





If necessary, replace front bearing retainer oil seal.





a. Using a screwdriver, pry out the oil seal.





b. Using Special Service Tool (SST) 09950 - 60010 (09951 - 00510), 09950 - 70010 (09951 - 07150) and a hammer, drive in a new oil seal.
Drive in depth: 11.7 ± 0.5 mm (0.461 ± 0.020 inch) from retainer end.