Manual Shifting Test

HINT: With this test. it can be determined whether the trouble is within the electrical circuit or is a mechanical problem in the transmission.





1. Disconnect solenoid wire.

2. Inspect manual driving operation.





- Check that the shift and gear positions correspond with the table.

HINT: If the gear positions (L, 2 and D position) are difficult to distinguish, do the following road test.
- While driving. shift through the L, 2 and D positions, check that the gear change corresponds to the shift position.
- If any abnormality is found in the above test, the problem is in the transmission itself.

3. Connect solenoid wire.
4. Cancel out DTC.