With Tilt Steering Column

SERVICE SPECIFICATIONS
Pawl Stopper
1 or A 12.68 - 12.74 mm (0.4992 - 0.5016 inch)
2 or B 12.61 - 12.67 mm (0.4965 - 0.4988 inch)
3 or C 12.54 - 12.60 mm (0.4937 - 0.4961 inch)
4 or D 12.47 - 12.53 mm (0.4909 - 0.4933 inch)
5 or E 12.40 - 12.46 mm (0.4882 - 0.4906 inch)
6 or F 12.33 - 12.39 mm (0.4854 - 0.4878 inch)
7 or G 12.26 - 12.32 mm (0.4827 - 0.4850 inch)

TIGHTENING SPECIFICATIONS
Assembly Set Bolt And Nut 25 Nm (19 ft. lbs.)
Compression Spring Set Bolt 7.8 Nm (69 inch lbs.)
Control Shaft Lever To Control Shaft Assembly:
Automatic Transmission 35 Nm (26 ft. lbs.)
Intermediate Shaft To Control Valve Assembly 35 Nm (26 ft. lbs.)
Main Shaft Assembly To Sliding York Sub-Assembly 35 Nm (26 ft. lbs.)
Sliding W/Shaft York Sub-Assembly To
Intermediate Shaft 35 Nm (26 ft. lbs.)
Sliding York Sub-Assembly To
Sliding W/Shaft York Sub-Assembly 35 Nm (26 ft. lbs.)
Turn Signal Bracket Set Bolt 7.8 Nm (69 inch lbs.)
Tilt Lever Assembly Set Bolt 2 Nm (17 inch lbs.)
Tilt Sub Lever Side Pawl Set Bolt To Nut 5.9 Nm (52 inch lbs.)
Tilt Lever Retainer Set Nut 15 Nm (11 ft. lbs.)