Front

FRONT SPEED SENSOR REMOVAL



1. DISCONNECT SPEED SENSOR CONNECTOR

2. REMOVE SPEED SENSOR

(a) 4WD:

- Remove the 3 clamp bolts holding the sensor harness from the frame, upper arm and steering knuckle.

- 2WD:

- Remove the 2 clamp bolts holding the sensor harness from the frame and upper arm.

Torque: 5 N.m (55 kgf.cm. 48 In..lbf)

(b) Remove the speed sensor from the steering knuckle.Torque: 8 N.m (80 kgf.cm. 69 in..lbf)




FRONT SPEED SENSOR INSTALLATION


- Installation Is in the reverse order of removal.

NOTICE:
AFTER INSTALLATION. CHECK SPEED SENSOR SIGNAL-Refer to, "SPEED SENSOR AND DECELERATION SENSOR DIAGNOSIS SYSTEM" Section.