Steering Gear

SERVICE SPECIFICATIONS
Runout (Maximum) 0.3 mm (0.0118 inch)
Total Preload 0.5-1.4 Nm (4.3-12.2 inch lbs.)

TIGHTENING SPECIFICATIONS
Assembly Set Bolt And Nut 88 Nm (65 ft. lbs.)
Control Valve Housing To Rack Housing 18 Nm (13 ft. lbs.)
Control Valve Shaft To Intermediate Shaft 35 Nm (26 ft. lbs.)
Mount Bracket To Suspension Crossmember 88 Nm (65 ft. lbs.)
Pressure Feed Tube To
Control Valve Housing 19 (25) Nm (14 (18) ft. lbs.)
Self-Locking Nut 25 Nm (18 ft. lbs.)
Rack Housing Cap 69 Nm (51 ft. lbs.)
Rack Guide Spring Cap Lock Nut 51 (60) Nm (38 (51) ft. lbs.)
Rack To Rack End 61 (83) Nm (45 (62) ft. lbs.)
Return Tube To Control Valve Housing 19 (25) Nm (14 (18) ft. lbs.)
Turn Pressure Tube Union Nut 10 (13) Nm (7 (9) ft. lbs.)

NOTE: ( ) For use without Special Service Tool (SST).