Crankshaft Position Sensor: Testing and Inspection

COMPONENTS FOR REMOVAL AND INSTALLATION

REMOVE CRANKSHAFT POSITION SENSOR.
- Disconnect the crankshaft position sensor connector.





- Remove the crankshaft position sensor bolt.

Torque: 7.8 Nm (80 kgf.cm, 69 in lb)

NOTICE: "Cold" and "Hot" in the following sentences express the temperature of the sensor itself.
"Cold" is from -10°C (14°F) to 50°C (122°F) and
"Hot" is from 50°C (122°F) to 100°C (212°F).





INSPECT CRANKSHAFT POSITION SENSOR RESISTANCE.
- Using an ohmmeter, measure the resistance between terminals.

Resistance:
Cold: 1,630 - 2,740 Ohms
Hot: 2,065 - 3,225 Ohms

- If the resistance is not as specified, replace the crankshaft position sensor.

INSTALLATION HINT: Installation is in the reverse order of removal.