With Non-Tilt Steering Column

TIGHTENING SPECIFICATIONS
Assembly Set Bolt And Nut 25 Nm (19 ft. lbs.)
Control Shaft Lever To Control Shaft Assembly:
Automatic Transmission 35 Nm (26 ft. lbs.)
Intermediate Shaft To Worm Gear Valve Assembly 35 Nm (26 ft. lbs.)
Main Shaft Assembly To
Sliding W/Shaft York Sub-Assembly 35 Nm (26 ft. lbs.)
Sliding W/Shaft York Sub-Assembly To
Intermediate Shaft 35 Nm (26 ft. lbs.)