Body Mechanical

SPECIAL SERVICE TOOLS (SST)





LUBRICANT





SPECIAL SERVICE MATERIALS (SSM)


ADHESIVE USAGE INSTRUCTIONS




1. CHOOSE SUITABLE ADHESIVE SET
^ Use an adhesive set suitable for the ambient temperature.




2. CHECK ADHESIVE USABLE TIME
^ After mixing main and hardening agents, finish glass installation within the specified time as shown. Example: For glass installation in an ambient temperature of 25 °C (77 °F), apply adhesive set No. 35 within 45 minutes.




3. CHECK ADHESIVE HARDENING TIME
^ After main and hardening agents are mixed, leak tests should be made only after the hardening time has elapsed.

Example: The hardening time for adhesive set No. 35 with an ambient temperature of 25 °C (77 °F) is 150 minutes.

CAUTION: Do not drive the vehicle until at least double the hardening time has elapsed.