Removal and Installation

REMOVAL
1. Drain engine coolant.





2. Remove radiator grille.
Remove the 7 clips and radiator grille.
3. Disconnect upper radiator hose.
4. Disconnect radiator reservoir hose.
5. Disconnect lower radiator hose.
6. Remove No. 2 fan shroud.
7. A/T: Disconnect oil cooler hoses.





8. Remove radiator.
Remove the 4 bolts and radiator.

INSTALLATION
Installation is in the reverse order of removal.

NOTE: Insert the tabs of the radiator support through the radiator service holes.

Torque the 4 bolts and radiator: 12 Nm (8.7 ft. lbs.)